RCD (Roll Centering Device)

INSTALLATION PICTURE

INSTALLATION PICTURE

SPECICATION

1) PURPOSE OF USAGE

This machine helps easily to position a chucked paper roll to the mill roll stand, only operator can adjust by naked eye and detect the customer’s own marked line manually. These processing can change automatically with RCD machine.

When using RCD machine, operator doesn’t need to measure width of paper. RCD is not influenced by width of paper board changing. It can minimize trim and increase production efficiency.

2) STANDARD SPECICATION

Encoder and Laser sensor are installed at the center of mill roll stand to measure width of paper automatically.

RCD 작동 원리

RCD Operation Principles

3) Equipment specification

  • 2 Set of Encoder module
  • 2 Set of Laser sensor
  • 1 Main Control Box
  • 2 Operator touch panel
  • 2 push button on Splicer button block
  • Encoder Module

    Encoder Module

  • Laser Sensor Module

    Laser Sensor Module

  • Main Control Box

    Main Control Box

  • Sub Touch Panel

    Sub Touch Panel

RCD Composition

4) Installation

  • Encoder module: mill roll stand cylinder
  • Laser Sensor module : Chucking Cone
  • Main control box : left, right mill roll stand Drive side or bridge
  • Operator touch panel : left, right mill roll stand Operator side

Product Specification

Position Accuracy
±1mm
Sensing Method
by two laser sensors measure the chucking depth and 2 Encoders measure the distance of each swing arms position
Reference Position
to be indicated by operator (center line to be changed by operator at the touch pads)
Interface
control of hydraulic to be interfaced with touch pads
Laser Sensor
Panasonic, Japan made
Encoder Module
Timing Belt with Encoder
Total Power
.5KW per set
Ambient Temp.
0℃ ~ 40℃
Total Installed Power
1.5KW

Product overview

ZEMISCO Youtube Channel: https://www.youtube.com/channel/UCjY2R5-KrLuHFdFn-q0A3Ww/featured